by Dr. Ray Nims
Until fairly recently, it has been common practice to authenticate human cell cultures using phenotypic status (e.g., receptor or protein expression) and animal species of origin testing. This level of authentication is better than none, but it is not sufficient to unambiguously identify a human cell culture. The result has been that we are still hearing about cases of misidentified human cells being used for biomedical research.
There are now methods available that are capable of rapidly and unambiguously identifying human cell lines, tissues, and cell preparations to the individual level. The recent demonstration of the potential utility of molecular technologies such as short tandem repeat (STR) and single nucleotide polymorphism (SNP) profiling for cell authentication has provided the impetus for development of a new standardized method for human cell authentication.
To this end, an ATCC Standards Development Organization workgroup with international representation has spent the past two years developing a consensus standard for the Authentication of Human Cell Lines through STR Profiling. The forthcoming Standard will provide guidance on the use of STR profiling for authenticating human cells, tissue, and cell lines. It will contain methodological detail on the preparation and extraction of the DNA, guidance on the appropriate numbers and types of loci to be evaluated and on interpretation and quality control of the results. Associated with the standard itself will be the establishment of a public STR profile database which will be administered and maintained by the National Center for Biotechnology Information (NCBI). The database primarily will contain STR profiles of commonly used cell lines.
STR Profiling of Hela Cells
An announcement that the Standard is now available for public 45-day review, comment, and vote was published in the October 22, 2010 issue of the ANSI newsletter Standards Action.
The benefits of the Standard will depend on the degree to which it is adopted and followed in the biomedical research and development and biopharmaceutical communities. Taking a broader view, it is hoped that funding agencies and journals will begin to use such authentication standards as important considerations for funding or publishing research employing human cells. The quality and validity of funded and published research should benefit greatly as a result of the reduction in frequency of use of misidentified human cells.
The deadline for comments is December 6, 2010. There is still time to review the draft Standard and to voice your opinions and concerns.
Tuesday, November 16, 2010
Wednesday, November 3, 2010
Fry those mollicutes!
By Dr. Ray Nims
It is not only viruses that may be introduced into biologics manufactured in mammalian cells using bovine sera in upstream cell growth processes. The other real concern is the introduction of mollicutes (mycoplasmas and acholeplasmas). Mollicutes, like viruses, are able to pass through the filters (including 0.2 micron pore size) used to sterilize process solutions. Because of this, filter sterilization will not assure mitigation of the risk of introducing a mollicute through use of contaminated bovine or other animal sera in upstream manufacturing processes.
Does mycoplasma contamination of biologics occur as a result of use of contaminated sera? The answer is yes. Most episodes are not reported to the public domain, but occasionally we hear of such occurrences. Dehghani and coworkers reported the occurrence of a contamination with M. mycoides mycoides bovine group 7 that was proven to have originated in the specific bovine serum used in the upstream process (Case studies of mycoplasma contamination in CHO cell cultures. Proceedings from the PDA Workshop on Mycoplasma Contamination by Plant Peptones. Pharmaceutical Drug Association, Bethesda, MD. 2007, pp. 53-59). Contamination with M. arginini and Acholeplasma laidlawii attributed to use of specific contaminated lots of bovine serum have also occurred.
Fortunately, the risk of introducing an adventitious mollicute into a biologics manufacturing process utilizing a mammalian cell substrate may be mitigated by gamma-irradiating the animal serum prior to use. This may be done in the original containers while the serum is frozen. Unlike the case for viruses, in which the efficacy of irradiation for inactivation may depend upon the size of the virus, mollicute inactivation by gamma irradatiion has been found to be highly effective (essentially complete), regardless of the species of molicute. The radiation doses required for inactivation are relatively low compared to those required for viruses (e.g., 10 kGy or less, compared to 25-45 kGy for viruses). The gamma irradiation that is performed by serum vendors is typically in the range of 25-40 kGy. This level of radiation is more than adequate to assure complete inactivation of any mollicutes that may be present in the serum. For instance, irradiation of calf serum at 26-34 kGy resulted in ≥6 log10 inactivation of M. orale, M. pneumoniae, and M. hyorhinis. In the table below I have assembled the data available on inactivation of mollicutes in frozen serum by gamma-irradiation.
So, the good news is that gamma irradiation of animal serum that is performed to mitigate the risk of introducing a viral contaminant will also mitigate the risk of introducing a mollicute contaminant. If the upstream manufacturing process cannot be engineered to avoid use of animal serum, the next best option is to validate the use of gamma irradiated serum in the process. In fact, the EMEA Note for guidance on the use of bovine serum in the manufacture of human biological medicinal products strongly recommends the inactivation of serum using a validated and efficacious treatment, and states that the use of non-inactivated serum must be justified.
References: Gauvin and Nims, 2010; Wyatt et al. BioPharm 1993;6(4):34-40; Purtle et al., 2006
It is not only viruses that may be introduced into biologics manufactured in mammalian cells using bovine sera in upstream cell growth processes. The other real concern is the introduction of mollicutes (mycoplasmas and acholeplasmas). Mollicutes, like viruses, are able to pass through the filters (including 0.2 micron pore size) used to sterilize process solutions. Because of this, filter sterilization will not assure mitigation of the risk of introducing a mollicute through use of contaminated bovine or other animal sera in upstream manufacturing processes.
Does mycoplasma contamination of biologics occur as a result of use of contaminated sera? The answer is yes. Most episodes are not reported to the public domain, but occasionally we hear of such occurrences. Dehghani and coworkers reported the occurrence of a contamination with M. mycoides mycoides bovine group 7 that was proven to have originated in the specific bovine serum used in the upstream process (Case studies of mycoplasma contamination in CHO cell cultures. Proceedings from the PDA Workshop on Mycoplasma Contamination by Plant Peptones. Pharmaceutical Drug Association, Bethesda, MD. 2007, pp. 53-59). Contamination with M. arginini and Acholeplasma laidlawii attributed to use of specific contaminated lots of bovine serum have also occurred.
Fortunately, the risk of introducing an adventitious mollicute into a biologics manufacturing process utilizing a mammalian cell substrate may be mitigated by gamma-irradiating the animal serum prior to use. This may be done in the original containers while the serum is frozen. Unlike the case for viruses, in which the efficacy of irradiation for inactivation may depend upon the size of the virus, mollicute inactivation by gamma irradatiion has been found to be highly effective (essentially complete), regardless of the species of molicute. The radiation doses required for inactivation are relatively low compared to those required for viruses (e.g., 10 kGy or less, compared to 25-45 kGy for viruses). The gamma irradiation that is performed by serum vendors is typically in the range of 25-40 kGy. This level of radiation is more than adequate to assure complete inactivation of any mollicutes that may be present in the serum. For instance, irradiation of calf serum at 26-34 kGy resulted in ≥6 log10 inactivation of M. orale, M. pneumoniae, and M. hyorhinis. In the table below I have assembled the data available on inactivation of mollicutes in frozen serum by gamma-irradiation.
So, the good news is that gamma irradiation of animal serum that is performed to mitigate the risk of introducing a viral contaminant will also mitigate the risk of introducing a mollicute contaminant. If the upstream manufacturing process cannot be engineered to avoid use of animal serum, the next best option is to validate the use of gamma irradiated serum in the process. In fact, the EMEA Note for guidance on the use of bovine serum in the manufacture of human biological medicinal products strongly recommends the inactivation of serum using a validated and efficacious treatment, and states that the use of non-inactivated serum must be justified.
References: Gauvin and Nims, 2010; Wyatt et al. BioPharm 1993;6(4):34-40; Purtle et al., 2006
Wednesday, October 27, 2010
Risky Business
By Dr. Scott Rudge
“Risk Analysis” is a big topic in pharmaceutical and biotech product development. The International Conference on Harmonization (ICH) has even issued a guidance document on Risk Analysis (Q9). Despite the documentation available and the regulatory emphasis, these tools remain poorly understood. They are used to justify limiting the extent of fundamental understanding that can be gained on a process, while simultaneously used as a cure-all for management challenges that we face in pharmaceutical process development.
Risk analysis focuses only on failure modes. Failure mode effect and analysis (FMEA) was developed by the military, first published as MIL-P-1629, “Procedures for Performing a Failure Mode, Effects and Criticality Analysis” in November 1949. The procedure was established to discern the effects of system failure on mission success and personnel safety. Since then, we have found a much broader range of applications for this type of analysis. The methodology is used in the manufacture of airplanes, automobiles, software and elsewhere. People have devised “design” FMEAs and “process” FMEAs (DFMEA and PFMEA). These are all great tools, and help us to design and build better, safer products with better, safer processes.
Where Risk Analysis Falls Down
The FMEA is such a great hammer, it can make everything look like a nail. And when regulatory authorities are encouraging companies to use Risk Analysis for product design and process validation, the temptation to apply it further can be overwhelming. In particular, risk analysis is used in three inappropriate ways, in my estimation:
“Risk Analysis” is a big topic in pharmaceutical and biotech product development. The International Conference on Harmonization (ICH) has even issued a guidance document on Risk Analysis (Q9). Despite the documentation available and the regulatory emphasis, these tools remain poorly understood. They are used to justify limiting the extent of fundamental understanding that can be gained on a process, while simultaneously used as a cure-all for management challenges that we face in pharmaceutical process development.
Risk analysis focuses only on failure modes. Failure mode effect and analysis (FMEA) was developed by the military, first published as MIL-P-1629, “Procedures for Performing a Failure Mode, Effects and Criticality Analysis” in November 1949. The procedure was established to discern the effects of system failure on mission success and personnel safety. Since then, we have found a much broader range of applications for this type of analysis. The methodology is used in the manufacture of airplanes, automobiles, software and elsewhere. People have devised “design” FMEAs and “process” FMEAs (DFMEA and PFMEA). These are all great tools, and help us to design and build better, safer products with better, safer processes.
Where Risk Analysis Falls Down
The FMEA is such a great hammer, it can make everything look like a nail. And when regulatory authorities are encouraging companies to use Risk Analysis for product design and process validation, the temptation to apply it further can be overwhelming. In particular, risk analysis is used in three inappropriate ways, in my estimation:
- Decision analysis
- Project management
- Work avoidance
Quite often, risk analysis tools are used to guide decisions. Here, the pros and cons of selecting a particular path are weighed, using the three criteria of risk analysis (occurrence, detectability and severity) as guides. However, not every decision path leads to a failure mode or an outcome that could be measured as a consequence. And detectability and occurrence may not be the only or most appropriate factors by which to weight a consequence. There are excellent decision tools that are designed specifically for weighting and evaluating preference criteria. A very simple tool is the Kepner Tregoe (KT) decision matrix. Decision analysis uses very detailed descriptions of the decision to model the potential outcomes. The KT decision matrix is sufficient for many decisions, large and small. But if you really want to study the anatomy of a decision, decision analysis is the most satisfactory method.
FMEAs are sometimes inappropriately applied in project management, to assign prioritization and order in which tasks should be completed. This may be handy in some instances, but is somewhat misleading or inappropriate in others. The riskiness of an objective should not be the sole determinant in its prioritization. Quite often, the fundamentals or building blocks need to be in place in order to best address the riskiest proposition in a project. Prematurely addressing the pieces of a project that present the greatest risk of failure may lead to that failure. On the other hand, being “fast to fail” and eliminate projects that might not bear fruit with the least amount of resources spent, is critical to overall company or project success. Project management requires consideration of failure modes, but also resource programming and timeline management. FMEAs can be an element of that formula, but should not be the focus.
Finally, and perhaps most painfully, FMEAs are used to justify avoiding work. Too often, risk analysis is applied to a problem, not to identify the elements that are most deserving of attention, but to justify neglecting areas that do not rank sufficiently high in the risk matrix. Sometimes, the smallest risks are the easiest to address, and in addressing them, variability can be removed from the process. Variability is the “elephant in the room” when it comes to pharmaceutical quality, as has been concisely pointed out by Johnston and Zhang.
The FMEA is a stellar tool, and it is applicable to problems in design, process and strategy across many industries. Its quantitative feel makes practitioners feel as though they are actually measuring something, and can make fine distinctions between risks that they were unable to articulate before. However, the FMEA can be applied rather too widely, or sometimes unscrupulously, yielding bad data and bad decisions.
Thursday, October 14, 2010
National Chemistry Week
By Dr. Sheri Glaub
Oct 17-23 is National Chemistry Week . This year’s theme is “Behind the Scenes with Chemistry”, which celebrates the chemistry in movies, set designs, makeup artistry and common special effects.
As exciting at that is, imagine a career working on life-saving therapies. Drug innovations in chemistry have helped increase life expectancy in the US by 30 years over the past century, and many chemical disciplines are involved. For example, medicinal and organic chemists isolate medicinal agents found in plants and create new synthetic drug compounds. Biochemists investigate the mechanism of a drug action; engage in viral research; conduct research pertaining to organ function; or use chemical concepts, procedures, and techniques to study the diagnosis and therapy of disease and the assessment of health. Analytical chemists use their knowledge of chemistry, instrumentation, computers, and statistics to solve problems in almost all areas of chemistry. Their measurements are used to assure compliance with regulations; to assure the safety and quality of food, pharmaceuticals, and water; to support the legal process; and to help physicians diagnose disease. Last, but not least, chemical engineers apply the principles of chemistry, math, and physics to the design and operation of large-scale chemical manufacturing processes. They translate processes developed in the lab into practical applications for the production of products such as plastics, medicines, detergents, and fuels.
This year, the Nobel Prize in Chemistry was jointly awarded to a trio of chemists for palladium-catalyzed cross couplings in organic synthesis. A recent article in Chemical and Engineering News quotes Stephen L. Buchwald, a chemistry professor at Massachusetts Institute of Technology. “This is a very exciting day for organic chemistry. This is a well-deserved award that is long overdue. It is hard to overestimate the importance of these processes in modern-day synthetic chemistry. They are the most used reactions by those in the pharmaceutical industry.”
The future of prescription drugs and medical devices depends on kids getting excited about science now. If you are in the Denver area, make plans to attend the Denver Museum of Nature and Science with your children on October 16 or 17 for the 7th Annual Demonstration and Outreach hosted by University of Northern Colorado Student Affiliate Chapter with advisor Dr. Kim Pacheco. If you are not in the Denver area, check with your local museum or your local ACS section to see what is planned.
Oct 17-23 is National Chemistry Week . This year’s theme is “Behind the Scenes with Chemistry”, which celebrates the chemistry in movies, set designs, makeup artistry and common special effects.
As exciting at that is, imagine a career working on life-saving therapies. Drug innovations in chemistry have helped increase life expectancy in the US by 30 years over the past century, and many chemical disciplines are involved. For example, medicinal and organic chemists isolate medicinal agents found in plants and create new synthetic drug compounds. Biochemists investigate the mechanism of a drug action; engage in viral research; conduct research pertaining to organ function; or use chemical concepts, procedures, and techniques to study the diagnosis and therapy of disease and the assessment of health. Analytical chemists use their knowledge of chemistry, instrumentation, computers, and statistics to solve problems in almost all areas of chemistry. Their measurements are used to assure compliance with regulations; to assure the safety and quality of food, pharmaceuticals, and water; to support the legal process; and to help physicians diagnose disease. Last, but not least, chemical engineers apply the principles of chemistry, math, and physics to the design and operation of large-scale chemical manufacturing processes. They translate processes developed in the lab into practical applications for the production of products such as plastics, medicines, detergents, and fuels.
This year, the Nobel Prize in Chemistry was jointly awarded to a trio of chemists for palladium-catalyzed cross couplings in organic synthesis. A recent article in Chemical and Engineering News quotes Stephen L. Buchwald, a chemistry professor at Massachusetts Institute of Technology. “This is a very exciting day for organic chemistry. This is a well-deserved award that is long overdue. It is hard to overestimate the importance of these processes in modern-day synthetic chemistry. They are the most used reactions by those in the pharmaceutical industry.”
The future of prescription drugs and medical devices depends on kids getting excited about science now. If you are in the Denver area, make plans to attend the Denver Museum of Nature and Science with your children on October 16 or 17 for the 7th Annual Demonstration and Outreach hosted by University of Northern Colorado Student Affiliate Chapter with advisor Dr. Kim Pacheco. If you are not in the Denver area, check with your local museum or your local ACS section to see what is planned.
Wednesday, September 22, 2010
Manufacturing Biologics with CHO Cells? What’s the Risk for Viral Contamination?
by Dr. Ray Nims
Chinese hamster ovary (CHO) cells are frequently used in the biopharmaceutical industry for the manufacture of biologics such as recombinant proteins, antibodies, peptibodies, and receptor ligands. One of the reasons that CHO cells are often used is that these cells have an extensive safety track record for biologics production. This is considered to be a well-characterized cell line, and as a result the safety testing required may be less rigorous in some respects (e.g., retroviral safety) than that required for other cell types. But how susceptible is the cell line to viral contamination?
There are a couple of ways of answering this question. One way is to examine, in an empirical fashion, the susceptibility of the cell type to productive infection by model exogenous viruses. This type of study has been conducted at least three times over the past decades by different investigators. Wiebe and coworkers (In: Advances in Animal Cell Biology and Technology for Bioprocesses. Great Britain, 1989; 68-71) examined over 45 viruses from 9 virus families for ability to infect CHO-K1 cells, using immunostaining and cytopathic effect to detect infection. Only 7 of the viruses (Table 1) were capable of infecting the cells. Poiley and coworkers (In Vitro Toxicol. 4: 1-12, 1991) followed with a similar study in which 9 viruses from 6 families were evaluated for ability to infect CHO-K1 cells as detected by cytopathic effect, hemadsorption, and hemagglutination. This study did not add any new viruses to the short list (Table 1). The most recent study was conducted by Berting et al. This study involved 14 viruses from 12 families. The viruses included a few known to have contaminated CHO cell-derived biologics in the past two decades, and therefore did add some new entities to the list in Table 1. Still, the list of viruses that are known to replicate in CHO cells is relatively short.
There are a couple of ways of answering this question. One way is to examine, in an empirical fashion, the susceptibility of the cell type to productive infection by model exogenous viruses. This type of study has been conducted at least three times over the past decades by different investigators. Wiebe and coworkers (In: Advances in Animal Cell Biology and Technology for Bioprocesses. Great Britain, 1989; 68-71) examined over 45 viruses from 9 virus families for ability to infect CHO-K1 cells, using immunostaining and cytopathic effect to detect infection. Only 7 of the viruses (Table 1) were capable of infecting the cells. Poiley and coworkers (In Vitro Toxicol. 4: 1-12, 1991) followed with a similar study in which 9 viruses from 6 families were evaluated for ability to infect CHO-K1 cells as detected by cytopathic effect, hemadsorption, and hemagglutination. This study did not add any new viruses to the short list (Table 1). The most recent study was conducted by Berting et al. This study involved 14 viruses from 12 families. The viruses included a few known to have contaminated CHO cell-derived biologics in the past two decades, and therefore did add some new entities to the list in Table 1. Still, the list of viruses that are known to replicate in CHO cells is relatively short.
Chinese hamster cells possess an endogenous retrovirus which expresses its presence in the form of retroviral particles, however these particles have been consistently found to be non-infectious for cells from other animals, including human cells. This endogenous retrovirus therefore does not present a safety threat (Dinowitz et al. Dev. Biol. Stand. 76:210–207, 1992).
A second way of looking at the question of viral susceptibility of CHO cells is to examine the incidence and types of reported viral contaminations of manufacturing processes employing CHO cell substrates. This subject has been reviewed a number of times, most recently by Berting et al. The types of viral contaminants fill a fairly short list (Table 2). In most cases, the contaminations have been attributed to the use of a contaminated animal-derived raw material, such as bovine serum.
Considering the frequency with which CHO cell substrates have been used in biologics production, this history of viral contamination is remarkably sparse. This is further testament to the overall safety of this particular cell substrate.
Subscribe to:
Posts (Atom)



